What size tablecloth will fit your table?

DINING & TABLE LINEN

Published

A cloth can be long enough and still be too narrow. Measure the table as you will use it, then check what hangs over every edge.

To find your tablecloth size, add twice the overhang you want to each tabletop measurement. A rectangular table 180 cm long and 90 cm wide, with a chosen 25 cm drop all round, needs a cloth 230 × 140 cm. For a round table, add twice the drop to its diameter. The overhang is usually called the drop: the fabric hanging below the edge, on each side. Matouk's sizing method.

That calculation is straightforward. Shopping can be less obliging. The cloth you like comes in a small and a large, neither apparently acquainted with your table, and the “six-seater” label introduces more optimism than information.

Illustrated coral dining room with a bare oval timber table, six dark chairs, a decorated Christmas tree and a sideboard.
Start with the table itself, including its curved ends. This AI-generated Room Study shows a bare oval table; the measurements below are separate worked examples. Explore the Room Study

MEASURE BEFORE YOU BUY

Find your tablecloth size

Measure the table with any extension leaves in place. The drop is how far the cloth hangs below each edge.

Look for a finished cloth around230 × 140 cm

Each table dimension + twice your chosen drop. This is a target size, not a promise that a retailer sells it.

Choose the drop by trying a towel or spare sheet against a seated chair. Check actual product dimensions, care instructions and shrinkage information. For an oval cloth, check the manufacturer’s shape and fit guidance as well.

Check an available cloth backwards

Retailers will rarely offer precisely the size your calculation produces. Work backwards from the cloth you can buy:

End drop = (cloth length − table length) ÷ 2

Side drop = (cloth width − table width) ÷ 2

For the 180 × 90 cm table above, a 240 × 140 cm cloth gives a 30 cm drop at each end and 25 cm on each side. That small difference may be perfectly comfortable. A 240 × 120 cm cloth gives the same 30 cm at the ends but only 15 cm along the sides. Its length has not solved its width.

Here is a separate example in inches. A 72 × 36 inch table under a 90 × 60 inch cloth has 9 inches hanging at each end and 12 inches down each side. Those are not conversions of the centimetre example; they demonstrate the same calculation with common shopping units.

If the answer is negative in either direction, the cloth is smaller than the table there. That may be deliberate for a decorative topper, but it is not a full table covering. Moving it towards one side only borrows fabric from the other.

Measure the table that dinner will happen on

Put in any extension leaves you intend to use before measuring. Take the tabletop's length and width, not the distance between its legs. On a round table, measure the diameter through the centre. For an oval, record the longest and widest points and note the shape of the ends.

Keep the measurements for both the everyday and extended table. One cloth may work for both, but it will hang further at the ends when the extension leaves have been removed. If the difference is substantial, a longer entertaining cloth and a shorter everyday one may be more useful than trying to make a single size do everything.

Put any table protector in place for the drape trial too. Vision Linens includes this layer and extension leaves in its measuring instructions. Check that the protector's edge stays covered beneath your chosen cloth. Vision Linens' measuring guide.

Choose a drop with someone sitting there

The appropriate drop is partly a matter of taste. Sophie Allport suggests 15–20 cm for everyday meals and 25–30 cm for a more formal table; these are styling ranges, not requirements. Sophie Allport's drop guidance.

Try a cloth or clean sheet you already own over one edge, adjust its overhang and sit in the chair. Check where it meets your lap, whether chair arms catch it and what happens when you pull the chair back. Look at the end seats as well. A generous fall that looks lovely from the doorway can become an irritating bundle when somebody sits down.

I would make this small rehearsal before choosing a very long drop for a family meal. Fabric should not trail into a walking route or need gathering out of the way each time a guest stands. A formal-looking table is allowed to be easy to use.

Round, square and oval need their own check

For a round cloth on a round table, the calculation stays pleasantly simple. A 130 cm table with a 180 cm cloth gives a 25 cm drop around the edge. A separate imperial example: a 60 inch round table with an 84 inch round cloth has a 12 inch drop.

A square cloth on a round table produces longer points at the corners. It can look good, but it will not have the even hemline of a circle. Check those hanging corners against chairs and routes rather than treating the shortest side drop as the whole answer.

For an oval table, length and width are the starting measurements, but the cloth's cut matters. A rectangular cloth will fall differently around curved ends from a similarly sized oval one. Where the shape is unusual, a seller's pattern diagram or a physical drape trial tells you more than a seat-count chart.

Check what washing changes

Before ordering, read the actual fabric composition and care instructions. Ask whether the stated dimensions describe the cloth before or after washing and whether the maker provides any shrinkage allowance. Do not add an invented percentage to every cotton or linen purchase: different fabrics and finishes need their own information.

Think about the practical arrangement too. Can you wash and dry the larger size using the equipment and space you have? Is the pattern intended to run in one direction? If your favourite part of the design hangs below the tabletop, check that this is the part you want guests to see.

Keep the numbers somewhere useful

A photograph of the table with its measurements in your phone is worth taking. Record the extended length separately and note the drop you liked when seated. At the shop, you can compare two available sizes without remembering whether your scribbled width belonged to the table, the cloth or the doorway you measured last week.

Our Christmas-table Guide tackles the next decision: where serving dishes go once everyone sits down. If the furniture itself is the unresolved part, start with choosing a dining table that fits.

Keep the table's measurements with you when browsing. Pattern and colour are the enjoyable decisions; the arithmetic gives you permission to make them without discovering, ten minutes before lunch, that one end of the table has been left out of Christmas.

Table linen to compare once you have measured

Browse tablecloths in the UK Shop or tablecloths in the US Shop. Check the exact size offered before choosing a pattern. The selection includes different materials and shapes; a seat-count label is not a substitute for your measurements. We may earn commission through retailer links in the Shop. How our affiliate links work.