A bedside table has remarkably little to do and quite a few ways to get it wrong. The glass sits behind the lamp. The drawer cannot open past the bed frame. The switch is somewhere near the floor, so turning out the light becomes the final athletic event of the day.
None of this requires a bedroom makeover. It requires choosing a small patch of furniture for the person using it, then being rather strict about what earns a place on top. A beautifully styled bedside is of limited comfort when you have to clear a space before putting down a glass.
Begin with the mattress, not a matching set
Measure the height of the mattress surface on your actual bed. Include the topper if it stays. The same table can feel tall next to a low platform bed and disappear beside a deep divan, which is why its height in isolation tells you very little.
Around mattress height is a useful starting point, a relationship also discussed in Emily Henderson's bedroom design guidance. Treat it as a starting point, not a compulsory measurement. Sit and lie in your usual positions, then test where your hand comfortably reaches. If getting the glass involves sitting up and leaning across the lamp, change the arrangement.
Mock up the proposed height with a stable surface before buying. Test it with the objects you actually use. Someone who reads on their side needs a different reach from someone sitting upright against pillows. A bed with a thick, projecting frame also puts the tabletop further away than the mattress edge suggests.
The top needs room for a small accident
Measure the lamp at its widest point, including the shade. A narrow base with a generous shade can still consume most of a small bedside. Add the book open, your glasses and a coaster rather than arranging them in a neat stack. That is how the surface will look halfway through an evening.
For an illustrative layout, take a table 40cm wide and 35cm deep. A lamp with a 25cm-wide shade occupies much of its width even if the base is tiny. It might work if the lamp sits towards the back and the glass has a clear place near your hand. It will not magically accommodate a large plant, a tray and a week's reading as well. Draw the top at full size on paper and place the actual objects within it.
The drawer is for the unlovely useful things: tissues, hand cream, spare charging cables. Make sure it opens past the bed frame and can be reached without shifting the table. An open shelf is good for a current book; it becomes less appealing when it is a dust trap filled with cables and seven abandoned novels.

Put the reading light where you read
First decide whether the bedside light needs to illuminate a page or merely soften the room. A glowing little lamp may be lovely while providing an inadequate reading position. Conversely, a powerful exposed bulb can be intolerable when seen from a pillow.
Sit in bed with the light on. Check that the page is clear without placing your head between it and the light source. Then lie down and look towards the fitting. If the bulb shines straight into your eyes, adjust the position or shade rather than hoping a different cushion will hide it. Repeat the check from the other side of the bed if someone shares it.
A directed reading light can help two people keep different hours. It cannot promise that one person will sleep through the other's thriller. Test the spread of light across the second pillow, and favour an accessible control for each side. A dimmer is useful only when the lamp, bulb and dimming equipment are compatible.
Before committing to wall lights, mark their positions against the finished bed, headboard and seated eye level. A height copied from someone else's bedroom is not a specification. Plug-in designs still need cable planning; fixed electrical work needs a suitably qualified installer and the relevant local requirements observed.
Two sides do not have to behave alike
Matching tables are an easy way to settle a room, but they are not a moral requirement. One person may need a drawer, the other a larger surface for books. A room with an awkward doorway might accept a chest on one side and only a small table on the other.
Give different pieces one shared relationship. Similar top heights can make them feel companionable. A repeated timber tone, lamp finish or shade shape can also provide a connection. Do not try to make every quality match; two almost identical pieces often look more accidental than two deliberately different ones.
If one side has very little room, consider moving its lamp off the tabletop before choosing an impossibly small table. A properly fitted wall light can leave space for essentials. A wall shelf may help, but check the projecting edge near your head, its fixing requirements and how it affects getting in and out of bed. Small is not automatically considerate.
Deal with the cables while the furniture is out
Find the sockets before placing the table. Leave access to switches and plugs, and keep cables clear of moving bed mechanisms, drawer runners and walking routes. Do not trap them under furniture feet. A charging cable should reach its device without pulling it off the table when someone turns over.
Keep drinks away from electrical connections and leave lamps the clearances required by their maker. If the only way to power the arrangement is a tangle of extensions through the doorway, reconsider the position or ask an electrician about suitable provision. A basket can hide a cable; it cannot make an unsuitable electrical arrangement suitable.
Where visual clutter is the main problem, a small cable clip on a compatible surface can stop the charging end disappearing behind the table. That is a more useful purchase than a larger decorative tray to conceal the same problem.
Finish it in the evening
Make the final decisions at the time you use the room. A shade that looked pleasantly cream in daylight may produce a light you dislike after dark. A glossy table can reflect a bulb at just the wrong angle. A drawer handle can catch a dressing-gown sleeve on the way past.
Leave one easy patch of tabletop empty. It is where tomorrow's cup will go, or the book you did not quite finish. A bedside should be ready for an ordinary person to fall asleep beside it. It need not look as though that person has already checked out.
A bedside that works at night
A surface, a reachable light and a place for the small things.
Shop images show retailer photographs or Room Study styling illustrations, identified on each selection. These are suggestions for the decisions discussed, not a claim that every piece appears in the room.
UKEditorial selectionStyling illustration
Julian Bowen Coxmoor oak two-drawer bedside chest
Amazon UK
Two drawers give small bedside things somewhere to go while the top stays useful. Compare the height with the top of your mattress.
UKEditorial selectionRetailer photograph
Rizal fluted-glass bedside lamp
Nkuku
The ribbed-glass bedside lamp offers a different amount of visual weight from a fabric shade. Check its footprint, bulb and controls.
UKEditorial selectionStyling illustration
Yamazaki Tower four-tier swivelling accessory box in black
Amazon UK
A swivelling accessory box can contain the small loose items. Allow room for the compartments to open, not just the closed diameter.
Check the selected size, finish and retailer’s care or installation instructions. We may earn commission through retailer links in the Shop. Affiliate disclosure.
Keep reading
Sources and further reading
Explore more

I’ll just check on the potatoes
At Christmas, a trip to the kitchen can be an excellent excuse for five minutes to yourself. A welcoming house should offer somewhere to pause without requiring a household chore.

We were only going to play one round
Games tables are back in the interiors pages. There is something rather appealing about a room that gives us a reason to stay a little longer.




